SINTERIT LISA - Specification

B. Specification
GENERAL
Category
Desktop 3D printer
Printing technology
Selective Laser Sintering (SLS)
HARDWARE
Dimensions
620 x 400 x 660 [mm] (24.4 x 15.8 x 26.0 [in])
Total weight
41.0 [kg] (90.4 [lbs])
PACKAGING
Size of package
780 x 480 x 960 [mm] (30.7 x 18.9 x 37.8 [in])
Package weight
65.0 [kg] (143.3 [lbs])
Package contains
Sinterit Lisa Printer + set of accessories + Manuals
POWER
Power supply
220-240 [V] AC, 50/60 [Hz], 7 [A]
(100-130 [V] AC, 50/60 [Hz], 15 [A])
Average power consumption
0.9 [kW]
Maximum power consumption
1.6 [kW]
Tape of laser
Class 4, IR 5 [W]; λ =808 [nm]
Beam divergence
θ = 10 [°]
Beam output
CW (continuous wave)
INDEPENDENT HEATING SYSTEM
Multi zone
Heated piston, cylinder, Feed Bed, Print Bed
Max. temperature in the chamber
190 [
o
C] / 374 [
o
F]
POWDER
Powder PA12 Smooth - polyamide 12
20-100 [μm], average size 38 [μm]
Powder Flexa Black - TPU
20-105 [μm]
Powder Flexa Grey - TPU
20-105 [μm]
Storage powder temperature
(min-max)
10-40 [
o
C] (50-104 [
o
F])
11  Sinterit Lisa USER MANUAL