Registered in England No. 08405712
VAT Registration No. GB163 04 0349
Siretta Ltd
Basingstoke Road
Spencers Wood
Reading
Berkshire RG7 1PW
sales
email
web
+44(0)118 976 9000
sales@siretta.com
www.siretta.com
29
SNYPER-LTE Graphyte
User Manual
Download Latest Edition
Rev 1.7
Show Summary
Highlight ‘Show Summary’ and press OK. The SNYPER Graphyte will display the
number of cells by each network in frequency bands. Use the LEFT/ RIGHT buttons
to switch between signal strengths received on the device.
Press the DOWN button to view the summary of results in GSM*, UMTS and LTE.
* GSM surveys are only possible on the EU versions of the SNYPER-Graphyte.
Figure 32. Displaying survey results
Save Results
With default settings, this menu option will not appear as survey results will
automatically be saved at the completion of the survey. However, there is a setup
option to turn auto save off, in which case the Save Results option appears at the
completion of a survey. Use the UP/DOWN buttons to select Save Results and press
the OK to save the results, otherwise the survey results will be lost when the BACK
button is pressed.
NOTE:
Multiple listings may be shown for a network operator. The listing is
created by the MCC and MNC, and multiple MCC / MNC’s may be
assigned to the same network operator. This usually occurs because of
network mergers and can therefore be country specic.
To Next Page
Loading...