Sirona Cerec - System Components

65 45 177 D3492
14 D3492.201.09.01.02 05.2015
5System description Sirona Dental Systems GmbH
5.2System components Operating Instructions CEREC Radio Device
5.2
System components
The identifiable components and their role in the CEREC system are
presented below:
Component Description Role Symbol
Acquisition unit The PC platform used for recording
the dental data.
Data source. Initiates the
transmission to a milling unit.
Network unit A wireless transmitter/receiver with
an Ethernet connector. The Ethernet
socket is equipped with LEDs which
indicate the unit’s status.
Wireless node in the network.
Mobile network unit A network unit which is installed
inside an acquisition unit.
The network unit for the acquisition
unit.
Stationary network unit A network unit which is either
attached to the milling unit directly or
connected to a LAN.
Wireless end-point for the data
communication to the milling unit.
Milling unit Receives the data and processes it
to mill a restoration.
Data receiver
Operator A person possessing technical
knowledge (either by experience,
practice, or training) of the functional
details of the network.
Performs all infrastructural changes
to the network based on their
technical knowledge.
Dentist User who does not possess any
technical knowledge about the
working of the network.
Uses the network to transmit data.