Sirona Cerec - Increasing the Range

65 45 177 D3492
30 D3492.201.09.01.02 05.2015
7Data transmission Sirona Dental Systems GmbH
7.6Increasing the range Operating Instructions CEREC Radio Device
7.6
Increasing the range
If the distance between the acquisition unit and the stationary network
unit of the milling unit is too long to establish a direct connection, there is
the possibility to extend the range by using two additional network units
which have to be paired as a separate network.
The example below shows network units 1 and 2, which form one
network, and network units 3 and 4, which form a second, separate
network.
IMPORTANT
The two network units connected by a LAN cable have to be placed at
a distance from each other of at least one meter to prevent radio
disturbances.