15
4.1 Start-up and Log in
Activate your browser, and disable the proxy or add the IP address of this product into
the exceptions. Then, type this product’s IP address in the Location (for Netscape) or
Address (for IE) field and press ENTER. For example: http://192.168.0.1.
After the connection is established, you will see the web user interface of this product. To log
in as an administrator, enter your login name and password (default: admin/admin) and
click OK. If the password is correct, the web appearance will be changed into administrator
configure mode. As listed in its main menu, there are several options for system
administration.
To Next Page
Loading...
Need help?
General
