51
4.7.3 Set Log
This page support two methods to export system logs to specific destination by means of
syslog(UDP) and SMTP(TCP). The items you have to setup including:
IP Address for Syslogd
Host IP of destination where syslogs will be sent to.
Check Enable to enable this function.
IP address for Outgoing Mail Server
Input the SMTP server IP and port, which are concated with ':'. If you do not specify port
number, the default value is 25.
For example, "mail.your_url.com" or "192.168.1.100:26".
Log or Alert receipient
The recipients who will receive these logs. You can assign more than 1 recipient, using ';' or
',' to separate these email addresses.
To Next Page
Loading...
Need help?
General
