MK32 User Manual V1.1
24
2023 SIYI Technology, All Rights Reserved
monitor will be off for energy saving.
2.1.2 Charging
You can charge the remote controller only when it is powered off and only by
using the original PD fast charger.
1. Connect the remote controller to the PD charger and plug it into power supply.
2. The charging indicator lights on red; ground unit starts charging.
3. The charging indicator lights on green, charging is finished.
CAUTION
Normal 5V charger adapter cannot charge the ground unit, please do use SIYI original PD
fast charger.
The remote controller cannot be charged when it is working. Please do power off the
remote controller before charging.
2.1.3 Charging Indicator
Solid Red: Remote controller under charging.
Solid Green: Charging finished.
To Next Page
Loading...
