MK32 User Manual V1.1
65
2023 SIYI Technology, All Rights Reserved
3.9.1 Remote Control Relay
The "remote-control relay" function is developed for ultra-long-distance flight
missions. It supports two ground units to relay control the same air unit to reach a
maximum transmission distance twice that of a single standard transmission
system.
Steps
1. Prepare two MK32 remote controllers (dual edition).
2. Go to “Multiple Links – Function Type”, assign the two remote controllers as
“RC Relay TX-A” and “RC Relay TX-B”.
3. Bind “TX-A” and “TX-B” to the same air unit in turns.
4. In “Control Switch” page, assign a switch / button / dial to switch control of the
air unit from “TX-A” to “TX-B”.
To Next Page
