MK32 User Manual V1.1
66
2023 SIYI Technology, All Rights Reserved
5. RC Relay settings are finished.
3.9.2 Dual Operator
The "dual operator" function is developed for dual-operator scenarios and
supports up to two ground units to establish links with the same air unit at the
same time. One can be used to control the flight attitude of the drone, and the
other can be used to control the gimbal camera, optical pod, and other payloads.
Steps
1. Prepare two MK32 remote controllers (dual edition).
2. Go to “Multiple Links – Function Type”, assign the two ground units as “Dual
RC TX-A” and “Dual RC TX-B”.
To Next Page
