MK32 User Manual V1.1
59
2023 SIYI Technology, All Rights Reserved
3. According to the tips, if joystick coordinates are not “(0, 0)” when both joysticks
are standstill, it shows that joystick middle points are displaced. Please touch
“next” and do not touch joysticks.
4. Calibration of joystick middle points are finished. The next step is to calibrate
joystick maximum and minimum positions.
Please follow the tips again to push each joystick to its maximum/minimum
positions on all four dimensions.
Up: 0, 100
To Next Page
