MK32 User Manual V1.1
80
2023 SIYI Technology, All Rights Reserved
Mark
Step 1 and 2 have been finished before delivery.
If it is your first time adding a new connection in QGC, please do not check the option
“Automatically Connect on Start”. It can be checked later when you confirm that the
datalink is connected successfully.
4.3.2 Mission Planner
1. In “SIYI TX” app, go to “Datalink”, and choose “Bluetooth” in “Connection”, “PIX
/ PX4 / Ardupilot” in “Flight Controller”, and match the baud rate with the flight
controller TELEM port’s.
To Next Page
Loading...
