SIZZIX 660425 - Using Allstar, Bigz, Originals or on the Edge dies; Using Framelits or Wafer-Thin dies

7
Using any size AllStar
®
Dies or Sizzix Bigz, On The Edge
™
or
Originals Dies without Crease Rule
1. Place a die onto an appropriately sized Cutting Pad or the Premium Crease Pad.
Place paper or desired material to be cut on top of the die. Place another
appropriately sized Cutting Pad on top of the paper or material to create a
“sandwich” (Figure C).
2. Place sandwich on top of the Adapter Pad in the Sliding Tray.
3. Follow Steps 3–5 in Operating Instructions, page 6.
Figure C
Paper
Die
Premium Crease Pad
or Cutting Pad
Cutting Pad
"Sandwich"
Sliding Tray
Adapter Pad
Using Framelits
™
or Wafter-Thin Dies
1. Place material to be cut on top of a Cutting Pad. Align die on top of material as
desired. Place Cutting Pad on top of die to create a “sandwich” (Figure D).
2. Place sandwich on Big Shot™ Pro Solo Platform, Solo Shim and Solo Thin-Die
Adapter (sold separately) and place on top of the Adapter Pad in the Sliding
Tray.
3. Follow Steps 3–5 in Operating Instructions, page 6.
Figure D
Paper
Die
Cutting Pad
Cutting Pad
"Sandwich"
Sliding Tray
Adapter Pad
Solo Platform
Solo Shim
Solo Thin-
Die Adapter