22
Click , choose , tap on the object or person you want to track, and tap
to confirm your selection.
(NOTE: Make sure the size of the frame you mark is the same as the object
or person you tap, the frame should not be too large.）
②. Low-Battery return to home
③. Fail connection RETURN-TO-HOME (RTH)
①. Smart Return To Home
5. IMAGE RECOGNITION FOLLOW ME/GESTURE CONTROL
7. RETURN-TO-HOME (RTH)
6. HAND GESTURE
Click on the APP, count down 3 seconds to 0 seconds
with the hand motion to take photos or record the video,
please follow the tips from the (PIC.1).
The Return to Home (RTH) function bring the aircraft back to the Take Off
Point. This function only can be achieved under GPS mode.
There are 3 types of RTH: Smart RTH/Low-battery RTH/Fail connection RTH
Low-Battery RTH is triggered when the Flight Battery level is low, When low
battery RTH activated, aircraft ascends or descends automatically at the height
altitude of 30 meters, then you can alter the left and right joysticks to make
it landing in the safe area. Aircraft returns to the take-off point if the current
battery level can only support the aircraft long enough to decend from the
current altitude.
Aircraft will enter Return to Home Mode if the signal to the remote control
is lost. The aircraft will return to the take-off point. The aircraft may link the
remote control automatically during the RTH activated. If links sucessfully,
you can re-operate the aircraft.
WARNING:
This aircraft is equipped with obstacle-avoidance.
RTH Button The app´s RTH Button
within
PIC.1
Press the Return to Home Button on your remote
control or tap on the App of your smart phone, and
the remote control will start beeping. Your aircraft
will return to the TAKE OFF Point. Press the button
again to stop RTH procedure. or alter the left and
right joysticks to make the aircraft landing in the
safe area.
To Next Page
Loading...
