5.4 Foreseeable misuse
Any use differing from that stated in these instructions is strictly prohibited, particularly the following:
• use outside the indicated temperature range,
• use of non-specified lubricants,
• exceeding the maximum allowable operating pressure,
• use in continuous operation,
• use in areas with aggressive or corrosive materials (e.g. high ozone pollution),
• use in areas with harmful radiation (e. g. ionising radiation),
• feeding, forwarding, or storing hazardous substances and mixtures described in Annex I part 2–5 of
the CLP regulation (EG 1272/2008) and marked with warnings GHS01–GHS06 and GHS08
• feeding, forwarding or storing gases, liquefied gases, dissolved gases, vapours or fluids whose va-
pour pressure exceeds normal atmospheric pressure (1,013 mbar) by more than 0.5 bar at the maxi-
mum permissible operating temperature, and
• use in an explosion protection zone.
5.5 Modifications to the product
Unauthorised conversions or modifications may have unforeseeable effects on product safety and functional-
ity. Therefore, any unauthorised conversions or modifications are expressly prohibited.
5.6 Other applicable documents
In addition to these instructions, the following documents must be observed by the respective target group:
• operational instructions and approval rules
• safety data sheet (MSDS) of the lubricant used
Where appropriate:
• project planning documents
• instructions provided by the suppliers of purchased parts
• any documents of other components required to set up the centralised lubrication system
• other documents relevant for the integration of the product into the machine or system.
5.7 Notes concerning the type identification plate
The type identification plate indicates the type desig-
nation, order code and other key details of the ma-
chine.
To make sure no information is lost if the type identi-
fication plate becomes illegible, enter the details in
this manual:
Type _______________________________
Code ________________________________
Date of manufacture ________________________
To Next Page
Loading...
