SKF TKRS 21 - Memory (TKRS 31 Only); Bluetooth (TKRS 31 Only)

25EN
4.8 Memory (TKRS 31 only)
The stroboscope is equipped with a memory for quickly storing the current
state of the stroboscope. This includes the current manually set flash rate,
the measured flash rate from the laser tachometer and/or the settings for the
trigger input/output.
• By rotating the wheel (button 3) the memory slot can be selected.
• By pressing button 1 “save” the current status is saved to the selected
memory slot.
• By pressing button 2 “load” the memory is loaded to the stroboscope.
• By pressing the wheel (button 4) the memory is exited and the
stroboscope returns to the settings / FPM menu.
Different memory slots can be
scrolled through by using the
scroll wheel.
Save or load the saved speed by
pressing direct access buttons.
Fig. 21 – Memory slots
4.9 Bluetooth (TKRS 31 only)
The stroboscope is equipped with a Bluetooth module.
The Bluetooth functionality is not active.