27EN
6. Troubleshooting
Problem Solution
Display is dirty Use a wet cotton swab to clean the display area and a clean,
dry cotton cloth to remove any water remains.
Do not wash the display with too much water or solvents.
Menu is frozen Remove the batteries and wait for 1 minute before placing
them back.
Start the device and check that everything works.
SKF TKRS 31: If the problem re-occurs, execute a factory
reset in the settings menu.
Too short
operating time
Replace batteries with new batteries.
Check if another brand offers better performance.
Do not store the stroboscope in very hot or cold
environments.
Turn on the auto off function or reduce the screen
brightness to conserve battery power.
7. Spare parts and accessories
Designation TKRS 21 & 31
TKRT-RTAPE Reflective tape (only on TKRS 31)
TDTC 1/A General toolcase without inlay, size A
NOTES:
Static images are produced when the flash frequency is identical to, or a
multiple or fraction of the frequency of the motion.
To Next Page
Loading...
