MAINTENANCE PROCEDURES
This section includes instructions for basic maintenance procedures.
WARNING
Turn off the engine, remove tether cord cap and follow these
maintenance pro cedures when performing maintenance. If
you do not fo llow proper maintenance procedures you can be
injured by hot pa rts, m oving part s, el ectricity, chemicals or
other hazards.
WARNING
Should removal of a locking device be required (e.g . lock tabs,
self-locking fasteners, etc.) wh en undergoing disassem b ly/
assembly, always replace with a new one.
Engine Coolant
WARNING
Never open coolant tank cap wh en engine is hot.
Engine Coolant level Verification
Open the RH side panel, see
CONTROLS, INSTRUMENTS AND
EQUIPMENT
.
Check coolant level at room temperature. Liquid sho uld be at cold
level line of coolant tank.
NOTE: When checking level at low tem perature it may be slightly
lower then the mark.
If additional coolant is necessary or if entire system has to be refilled,
refer to an authorized Ski-Doo dealer, repair shop o r person of your
own choosing.
_________________
209
To Next Page
Loading...
