CONTROLS, INSTRUMENTS AND EQUIPMENT
mmo2009-005-006_a
TYPICAL — ENGAGE MECHANISM
Step 1: Apply and hold brake
Step 2: Lock brake lever using parking brake lever
To Release Parking Brake
Squeeze brake lever. Parking brake lever will automatically return to
its original position. Always release parking brake before riding.
5) Engine Cut-off Switch
The engine cut-off switch (tether cord) is located on the console.
The tether cord cap must be securely snapped on the engine cut-off
switch to allow vehicle operation.
NOTE: After en gine starting, 2 short beeps shou ld be heard if a
programmed D.E.S.S. key (tether cord cap) is correctly snapped
on engine cut-off switch. If another beep code is heard, refer to
MONITORIN G S YSTEM
for D .E.S .S. malfunction codes info rmation.
Pulling the te ther cord cap from the switch shuts the engine off.
WARNING
Always attach the t eth er cord eyelet to clothing b efore sta rting
the engine.
__________________
79
To Next Page