EasyManua.ls Logo

Ski-Doo REV GEN4 - Maintenance;Replacement

Ski-Doo REV GEN4
323 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
TRACTION ENHANCING PRODUCTS
Maintenance/Replacement
PROCEED W ITH A VISUAL INSPECTION OF YOUR TRACK BEFORE
EACH USE.
Look for any defects, such as:
Perforations in the track
Tears in the track (particularly aro und traction holes on studded
tracks)
Lugs that are broken or torn off, exposing portions of rods
Delamination of the rubber
Broken rods
Broken studs (studded tracks)
Bent studs (studded tracks)
Missing studs
Studs that are torn off the track
Missing track guide(s)
Also, ensure that studs nut are tighten to the recommended tight-
ening torque.
On approved studded tracks, replace broken or damaged studs
immediately. I f your track shows s igns of deterioration, it must be
replaced immediately. When in doubt, ask your dealer. Always
proceed with a visual inspection o f your track before each use.
WARNING
Riding with a damaged track or studs could lead to loss of con-
trol.
46
____
SAFETY INFORMATION
____

Table of Contents

Related product manuals