TRACTION ENHANCING PRODUCTS
WARNING
– See an authorized Ski-Doo dealer for current specific stud-
ding availability and app licatio ns.
– DO NOT EVER us e con ventional stud because, the track
thickness is thinner then our standa rd tracks and the stud
could tear off of track and separate from vehicle.
– Studs should only be installed in the locations indicated
by molded bulges in the track surface. Some track models
have two types of m olded bulges; triangles and circles.
See the warning molded into the track surface to know
which one to use.
– Never stud a track with a profile of 35 mm (1-3/8 in) or more.
– The number of stu ds installed must always perfectl y match
the pattern of molded bulges in the track.
– Always consult the traction product manufacturer’s instal-
lation instructions and recommendations before having
your dealer install studs and runners. It is very important
to follow the tightening torque specifications for the stud
bolts.
INSTALLING AN INCORRECT NUMBER OF STUDS OR AN
IMPROPER INSTALLATION CAN INCREASE TH E RISK OF THE
TRACK TEARING OR SEVERING.
____
SAFETY INFORMATION
___
45
To Next Page
Loading...
