MAINTENANCE PROCEDURES
Suspension Stopper Strap Condition
Inspect stopper straps for wear and cracks, bolt and nut for tightness.
If loose inspect holes for deformation. Replace as required. Tighten
nut to specification.
TIGHTENING TORQUE
Stopper strap nut
10N•m ± 1N•m (89lbf•in ±9lbf•in)
Suspension Lubrication
Lubricate the following suspension pivots at grease fittings. Refer to
MAINTENANCE S CHED ULE
for maintenance frequency.
SERVICE PRODUCT
Synthetic suspension grease
mmr2012-005-001_a
rMOTION AND rM OTION-X
1. Grease fitting
238
_________________
To Next Page