MAINTENANCE PROCEDURES
FUSE IDENTIFICATION
AMPERAGE
RATING
RY2 Accessory Relay
-
RY3 Fan Relay
-
RY4 Lighting Relay
-
Fuse Inspection
Check fuse condition and replace it if necessary.
To remove fuse from holder, pull fuse out. Check if filament is
melted.
1
2
A15E0KA
1. Fuse
2. Check if melted
WARNING
Do not use a higher rated fuse.
WARNING
If fuse has burnt out, source of malfunction should b e deter-
mined and corrected before restarting. See an au th orized
Ski-Doo dealer for servicin g.
242
_________________
To Next Page