MAINTENANCE PROCEDURES
mmr2017-036-008
1. Bulb
2. Bulb seal
Install a new bulb using the reverse of the removal procedure.
NOTICE
Never touch glass portion of an halogen bulb with
bare fingers, it shortens its operating life. If glass is touched,
clean it with iso pro pyl alcohol which will not leave a film on the
bulb.
Check headlights operation.
Headlights Beam A iming
Open the storage compartment, see
FRONT STORAGE COMPART-
MENT
.
Turn the adjustment screw with appropriate screwdriver to reach de-
sired beam height.
246
_________________
To Next Page