Multifunction Display code
If your speedometer shows SCALE in the multi-function display, it
means that the display selector button is stuck in the down position
or depressed when the electrical system was activated.
Change from One Unit to the Other
NOTE: Speedometer, odometer and trip meter will have their units
(kilometer or miles) changed all together.
Stop engine and open LH side panel.
Connectors are located underneath console near steering column.
Underneath console, look for:
– 1 circuit male connector housing with BLACK/GREY wire
– 1 circuit female connector housing with BLACK/BLUE wire.
Cut locking ties. Plug connectors together to change units from
miles to kilometers.
Unplug to return to miles reading. Fasten connector to harness with
locking ties.
A33E06A
TYPICAL — LIQUID COOLED MODELS
68
_________________________