Ski-Doo SUMMIT 583 1997 - Page 84

Section 03 ENGINE
Sub-Section 03 (454, 494, 583 AND 670 ENGINE TYPES)
03-03-13
NOTE:
Torque the 2 smaller screws (15 and
16) on magneto side to 10 N•m (90 lbf•
in
).
Apply pipe sealant (P/N 413 7023 00) on threads
prior to assembly angular tube
no. 11
.
At assembly on crankcase, apply medium
strength threadlocker (P/N 413 7030 00) on stud
threads
no. 12
.
Torque the crankcase/engine bracket nut
no. 13
to 38 N•m (28 lbf•ft).
To install magneto, refer to CDI MAGNETO 03-05.
'