To Next PageTo Next Page
Need help?Do you have a question about the Skil 1320 and is the answer not in the manual?
General| Type | Circular Saw |
|---|---|
| No-Load Speed | 5, 300 RPM |
| Bevel Capacity | 51 Degrees |
| Power | 13 Amps |
| Blade Diameter | 7-1/4 inches |
| Arbor Size | 5/8 inches |
Essential safety rules for operating any power tool to prevent injury.
Guidance on staying alert, using common sense, and wearing protective equipment.
Specific safety precautions and best practices for using mitre saws.
Important safety notes regarding power supply, tool conditions, and general operation.
Pre-operation checks and setup procedures for safe and effective use.
Guidelines for selecting and using compatible accessories and saw blades.
Instructions for assembling the transport handle, lock knob, and sliding fence.
Procedures for preparing the tool for transport or work.
Guidance on securely mounting the tool for stable operation.
Methods for securely holding the workpiece during cutting operations.
Detailed steps for adjusting the mitre angle for precise cuts.
Detailed steps for adjusting the bevel angle for precise cuts.
Instructions for performing cuts with combined mitre and bevel angles.
How to adjust the sliding fences for accurate workpiece positioning.
Instructions for using the laser line for guided cutting.
Step-by-step instructions for safely replacing the saw blade.
Procedure for replacing a worn or damaged table insert.
Ensuring accuracy by checking and adjusting blade and fence alignment.
