&2?C602
!"(&%&%)
#%'&!&#?2C2;A6C2
:.6;A2;.;02=2?3<?:21 /FB;.BA5<?6G21
=2?@<;;29 :.F ?2@B9A 6; :6@=9.06;4<3
6;A2?;.9D6?2@.;10<:=<;2;A@D56050<B91
0.B@2@2?6<B@5.G.?1 We recom mend that
all tool service be performed by a Skil Factory
Service Center or Authorized Skil Service
Station. SERVICE MEN: Disconnect tool and/or
charger from power source before servicing.
''%&
2.92?A 3<? /.AA2?F =.08@A5.A .?2 ;2.?6;4
A526?2;1<39632 If you notice decreased tool
performance or significantly shorter running
time between charges then it is time to replace
the battery pack. Failure to do so can cause
the tool to operate improperly or damage the
charger.
! ( ''%& "!,
<;4A2?:/.AA2?F@A<?.42@5<B91/26;A52
16@05.?421@A.A2 Battery packs last longer
and re-charge better when they are stored
discharged. Remember to fully re-charge
battery packs before using after prolonged
storage.
'""(%'"!
Your Skil tool has been properly lubricated and
is ready for use.
"'"%&
The motor in your tool has been engineered for
many hours of dependable service. To
maintain peak efficiency of the motor, we
recommend it be examined every six months.
Only a genuine Skil replacement motor
specially designed for your tool should be
used.
92.;6;4
'<.C<61 .00612;A@ .9D.F@
16@0<;;20AA52 A<<9.;1<?
05.?42? 3?<: A52 =<D2? @B==9F /23<?2
092.;6;4 The tool may be cleaned most
effectively with com pressed dry air. 9D.F@
D2.? @.32AF 4<4492@D52; 092.;6;4 A<<9@
D6A50<:=?2@@21.6?
Ventilation openings and switch levers must be
kept clean and free of foreign matter. Do not
attempt to clean by inserting pointed objects
through opening.
2?A.6;092.;6;4.42;A@.;1
@<9C2;A@ 1.:.42 =9.@A60
=.?A@ Some of these are: gasoline, car bon
tetrachloride, chlorinated cleaning solvents,
ammonia and household detergents that
contain ammonia.
!
WARNING
.6;A2;.;02
!
WARNING
!
CAUTION
-22-
BATTERY
PACK
CHARGER
FIG. 24
INDICATOR LIGHTS
SM 1619X02639 06-10:1619X02639 12-08 6/18/10 3:04 PM Page 22
To Next Page
Loading...
