-3-
6@0<;;20AA52=9B43?<:A52=<D2?@<B?02
.;1<?A52/.AA2?F=.083?<:A52=<D2?A<<9
/23<?2:.86;4.;F .17B@A:2;A@05.;46;4
.002@@<?62@ <? @A<?6;4=<D2? A<<9@ Such
preventive safety measures reduce the risk of
starting the power tool accidentally.
&A<?26192=<D2? A<<9@<BA<3A52?2.05 <3
05691?2; .;1 1< ;<A .99<D =2?@<;@
B;3.:696.? D6A5 A52 =<D2?A<<9 <? A52@2
6;@A?B0A6<;@A<<=2?.A2 A52 =<D2? A<<9
Power tools are dangerous in the hands of
untrained users.
.6;A.6;=<D2?A<<9@52083<?:6@.964;:2;A
<?/6;16;4 <3 :<C6;4 =.?A@/?2.8.42 <3
=.?A@.;1 .;F <A52? 0<;16A6<; A5.A:.F
.3320AA52=<D2?A<<9@<=2?.A6<;31.:.421
5.C2 A52 =<D2? A<<9 ?2=.6?21/23<?2 B@2
Many accidents are caused by poorly
maintained power tools.
22=0BAA6;4A<<9@@5.?=.;1092.;Properly
maintained cutting tools with sharp cutting
edges are less likely to bind and are easier to
control.
(@2A52=<D2?A<<9.002@@<?62@.;1A<<9
/6A@2A06;.00<?1.;02D6A5A52@26;@A?B0A6<;@
A.86;46;A<.00<B;AA52D<?86;40<;16A6<;@
.;1A52 D<?8 A< /2 =2?3<?:21Use of the
power tool for operations different from those
intended could result in a hazardous situation.
.AA2?FA<<9B@2.;10.?2
%205.?42<;9FD6A5A5205.?42?@=2063621
/F A52 :.;B3.0AB?2? A charger that is
suitable for one type of battery pack may
create a risk of fire when used with another
battery pack.
(@2 =<D2? A<<9@ <;9F D6A5@=206360.99F
12@64;.A21/.AA2?F=.08@ Use of any other
battery packs may create a risk of injury and
fire.
*52; /.AA2?F =.08 6@ ;<A 6; B@2 822=6A
.D.F3?<: <A52? :2A.9 </720A@ 9682=.=2?
096=@0<6;@ 82F@ ;.69@@0?2D@ <? <A52?
@:.99 :2A.9 </720A@ A5.A 0.; :.82 .
0<;;20A6<;3?<:<;2A2?:6;.9A<.;<A52?
Shorting the battery terminals together may
cause burns or a fire.
(;12?./B@6C2 0<;16A6<;@ 96>B61 :.F /2
2720A213?<:A52/.AA2?F.C<610<;A.0A3
0<;A.0A .00612;A.99F <00B?@ 39B@5 D6A5
D.A2?396>B610<;A.0A@2F2@.116A6<;.99F
@228 :2160.9 529= Liquid ejected from the
battery may cause irritation or burns.
&2?C602
.C2F<B?=<D2?A<<9@2?C6021/F.>B.963621
?2=.6? =2?@<; B@6;4 <;9F 612;A60.9
?2=9.02:2;A=.?A@ This will ensure that the
safety of the power tool is maintained.
BAA6;4=?<021B?2@
22= 5.;1@ .D.F 3?<:
0BAA6;4 .?2. .;1 /9.12
22=F<B?@20<;15.;1<;.BE696.?F5.;192
<?:<A<?5<B@6;4 If hands are holding the
saw, they cannot be cut by the blade.
<;<A ?2.05B;12?;2.A5A52 D<?8=6202
The guard cannot protect you from the blade
below the workpiece.
17B@AA520BAA6;412=A5A<A52A5608;2@@<3
A52D<?8=6202Less than a full tooth of the
blade teeth should be visible below the
workpiece.
!)%5<91=6202/26;40BA6;F<B?5.;1@
<?.0?<@@F<B?924 &20B?2A52D<?8=6202A<
@A./92=9.A3<?: It is important to support the
work properly to minimize body exposure,
blade binding, or loss of control.
<91 =<D2?A<<9/FA526;@B9.A214?6==6;4
@B?3.02@D52;=2?3<?:6;4 .;<=2?.A6<;
D52?2 A520BAA6;4A<<9:.F0<;A.0A 56112;
D6?6;4<?6A<D;0<?1 Contact with a "live" wire
will also make exposed metal parts of the tool
“live” and shock the operator.
*52; ?6==6;4.9D.F@ B@2.?6=32;02<?
@A?.645A 21424B612 This improves accuracy
of cut and reduces the chance for blade binding.
9D.F@ B@2/9.12@ D6A50<??20A@6G2.;1
@5.=216.:<;1C@?<B;1<3 .?/<? 5<92@
Blades that do not match the mounting
hardware of the saw will run eccentrically,
causing loss of control.
!2C2?B@21.:.421<? 6;0<??20A/9.12
D.@52?@<?/<9A@ The blade washers and bolt
were specially designed for your saw, for
optimum performance and safety of operation.
&.32AF%B92@3<?6?0B9.?&.D@
%2.1.99@.32AFD.?;6;4@.;1.996;@A?B0A6<;@
!
WARNING
!
DANGER
SM 1619X02639 06-10:1619X02639 12-08 6/18/10 3:04 PM Page 3