Skiller Pro+ - Deleting Macros; Reset to Factory Default

SKILLER PRO +
14

8.8.2.3 Delete Recordings
All keystrokes and delay time can be separately deleted. Select the command you want to delete from the
keystroke sequence. The command is now highlighted in blue. Click the right mouse button to open the
selection menu. Select “Delete“. The item is now removed from your keystroke sequence.
Note:
In case the edited macro was already assigned to a key, you will need to reassign it (see 9.1.1) and
confirm your change within the profile by clicking “Apply”. Only then will it be updated.
8.8.3 Delete Macro
To delete a macro, open the Macro Manager and select the macro you want to delete. The macro is now
highlighted in blue. To delete it, click “Delete”. A warning will appear. After you reconfirm, the macro will
be deleted.
Note:
In case the deleted macro is still assigned to a key within the Macro Settings you need to reset the key (see
9.1.4). Otherwise the macro will be still saved in the onboard memory of the keyboard.
8.9 Reset to Factory Default
This function resets all profile and macro settings to the factory default.