›
Attach the bag with the aid of the plastic carabines to the eyes on the left
and right boot trim panel.
Installing and removing the net partition behind the rear seats with variable
loading floor is carried out analogously as behind the rear seats without varia-
ble loading floor. Use the lower fixing eyes on the carrier rails in order to at-
tach the carabines.
Installing and removing the net partition behind the rear seats is carried out
analogously as behind the rear seats. Use the lower fixing eyes on the carrier
rails in order to attach the carabines. To enlarge the boot, the rear seats can
be removed » page 82.
The opening
D
» Fig. 99 in the net partition is designed to pass the three-
point seat belt » page 13 through.
Storage compartments
Fig. 100 Storage compartment on the left / right
Read and observe and on page 94 first.
The cover for the storage compartment
A
» Fig. 100 can be removed, thus en-
larging the boot.
›
Grasp the top part of the cover
A
and carefully remove it in the direction of
the arrow.
CAUTION
■
The removable storage compartment
A
» Fig. 100 on the left side is suitable
for stowing small objects weighing up to 1.5 kg.
■
The storage compartment
B
is designed for storing small objects of up to
0.5 kg. in weight in total.
Removable storage box
Fig. 101
Storage box
Read and observe and on page 94 first.
The storage box » Fig. 101 is placed under the variable loading floor and can be
taken out.
There is a storage space for the vehicle tool kit under the storage
box » page 192, Vehicle tool kit.
WARNING
The removable storage box must be located under the variable loading
floor for the safe use of the variable loading floor.
99
Transporting and practical equipment
To Next Page
Loading...
