Voice command Action
SETTINGS Selection for setting Bluetooth
®
, dialogue etc.
CANCEL The dialogue is ended.
a)
On vehicles fitted with the Amundsen+ navigation system, this function can be accessed via the naviga-
tion system menu; refer to the » operating instructions for the Amundsen+ navigation system.
If a voice command is not detected, the system answers with “Pardon?”, and a
new entry can be made. After the 2nd error the system repeats the aid. After
the 3rd attempt the answer “Cancelled.” is given and the dialogue is ended.
Store voice recording of a contact
If automatic name recognition does not work reliably for some contacts, you
can choose to save your own voice tag for the contact in the Phone book -
Voice tag - Record menu item.
Your own voice tag can also be saved using the voice control in the FURTHER
OPTIONS menu.
Voice commands - GSM III
Basic voice commands
Voice command Action
HELP
After this command the system repeats all possible
commands.
CALL NAME
After this command, a name can be entered to es-
tablish a connection with the requested party.
DIAL NUMBER
After this command, a telephone number can be
entered in order to establish a connection with the
requested party.
REDIAL The last selected telephone number is selected.
READ ADDRESSBOOK
The system reads out contacts from the telephone
book.
READ MESSAGES
The system reads the messages which were re-
ceived while the telephone was connected to the
control unit.
SHORT DIALOGUE
The help is significantly reduced (good operating
knowledge provided).
LONG DIALOGUE The help is not reduced (suitable for beginners).
CANCEL The dialogue is ended.
If the system does not recognise the command, it repeats the first part of the
help thus enabling a new entry to be completed. After the 2nd error the sys-
tem repeats the second part of the aid. After the 3rd attempt the answer “Can-
celled.” is given and the dialogue is ended.
Store voice recording of a contact
If automatic name recognition does not work reliably for some contacts, you
can choose to save your own voice tag for the contact in the Phone book -
Voice tag - Record menu item.
Your own voice tag can also be saved using the voice control in the FURTHER
OPTIONS menu.
Multimedia
Introduction
This chapter contains information on the following subjects:
Music playback via Bluetooth
®
123
Operating the radio and navigation system on the multifunction steering
wheel 124
AUX- and MDIinputs 125
CD change 125
DVD-preinstallation 126
Music playback via Bluetooth
®
The universal telephone preinstallation makes it possible to play back music
via Bluetooth
®
from devices such as MP3 players, mobile phones or notebooks.
To ensure that music can be played via Bluetooth
®
, you must first pair the de-
vice with the hands-free system in the Phone - Bluetooth - Media player
menu.
The music playback process is performed on the connected device.
The universal telephone preinstallation GSM II ensures that the music played
back via the hands-free system can be controlled with the remote con-
trol » page 122, Voice commands - GSM II.
Note
The device being connected must support the Bluetooth
®
A2DP profile; refer
to the operating instructions for the relevant device being connected.
123
Communication and multimedia
To Next Page
Loading...
