EasyManua.ls Logo

Skoda 2014 Yeti - Air Conditioning (Manual Air Conditioning); Climatronic (Automatic Air Conditioning)

Skoda 2014 Yeti
238 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Air conditioning (manual air conditioning)
Fig. 110 Controls of the air conditioning
Read and observe
and on page 103 first.
Individual functions can be set off or on by turning the knob or pressing the
respective button. When the function is switched on, the warning light lights
up.
Functions of the individual controls » Fig. 110
Setting temperature
Lower temperature
Increase temperature
Set the blower stage (stage 0: Blowers off, level 4: the highest blower
speed)
Set the direction of the air outlet » page 103
Air flow to the windows
Air flow to the upper body
Air flow in the footwell
Airflow over the windows and into the footwell
Switching the cooling system on/off
Switching the rear window heater on/off » page 70
Switching on/off aux. heating (standard heating) on/off » page 109
Switch recirculation on/off » page 104
Control the seat heater on the front left seat » page 78
Control the seat heater on the front right seat » page 78
A
B
C

Note
The warning light in the button  lights after activation, even if not all of
the conditions for the function of the cooling system have been met. By light-
ing up of the indicator light in the button, the operational readiness of the
cooling system is signalled.
During operation of the air conditioning, an increase in engine idle speed may
occur under certain circumstances in order to ensure sufficient heating com-
fort.
Climatronic (automatic air conditioning)
Fig. 111 Controls the Climatronic
Read and observe and on page 103 first.
The Climatronic in automatic mode ensures the best-possible setting of the
temperature of the outflowing air, the blower stage and air distribution.
The system also takes sunlight into account, which eliminates the need to al-
ter the settings manually.
Individual functions can be set off or on by turning the knob or pressing the
respective button. When the function is switched on, the warning light lights
up.
Functions of the individual controls » Fig. 111
Adjust the temperature for the left side or for both sides
Lower temperature
Increase temperature
Interior temperature sensor
A
B
106
Using the system

Table of Contents

Related product manuals