Radio/CD/Sound 9
Allocating the stations to the station buttons
Stations can be allocated to the buttons to make it easier
to select them quickly.
– Press one of the upper 6 station buttons until you hear a signal
⇒ page 2, fig. 1 . The station you are listening to is now
stored on the button.
A total of six stations can be stored on the station buttons for each mode;
FM1, FM2 or AM1 or AM2. The short form of the station name or the
station frequency will appear next to the button. Press one of the buttons
if you wish to listen to one of the stored stations.
Note
The memory on a button will be overwritten if a new station is stored
there.
RDS settings
Some stations transmit text and information in addition to
the station name.
– Press in the Radio main menu ⇒ page 6, fig. 4.
Further text information as running text will not be displayed on the
screen, in addition to the station name, for all RDS stations.
A tick
will indicate which options have been selected.
Function keys
• fixed: Only the station name will be shown.
• variable: Text information is shown as running text.
– autom.: The selected regional programme of a station
broadcasting over a wide area will continue to be displayed even when
To Next Page
Loading...
Need help?
General
