›
Restart SmartGate by tapping on the “Reboot”
1)
button.
Changing the PIN code for the Wi-Fi Direct connection
›
Open the SmartGate web interface » page 44, SmartGate web interface.
›
In the menu item “WiFi Direct PIN:”, enter the new PIN code (6 digits).
›
Confirm the PIN code change by tapping on the “Save” button.
›
Restart SmartGate by tapping on the “Reboot”
1 )
button.
Note
If you have forgotten your password/PIN code for connecting to SmartGate,
SmartGate must be reset to the factory settings in a specialised workshop.
Unlocking and opening
Unlocking and locking
Introduction
This chapter contains information on the following subjects:
With the key on the lock cylinder unlock / lock 46
Unlocking/locking with the remote control key 46
Unlocking/locking - KESSY 47
Vehicle locking / unlocking with the central locking button 47
SafeLock 48
Individual settings 48
Opening/closing a door 48
Child safety lock 49
Malfunctions 49
The vehicle is equipped with a central locking system which makes it possible
to unlock / lock all the doors, the fuel filler flap and boot lid simultaneously.
The door unlocking can be adjusted individually » page 48.
The unlocking of the vehicle is displayed by the turn signal lights flashing
twice.
If you unlock the vehicle and do not open a door or the boot lid within the next
45 seconds, the vehicle will lock again automatically.
The locking of the vehicle is displayed by the turn signal lights flashing once.
If the driver's door has been opened, the vehicle cannot be locked.
If the doors or the luggage compartment lid remain open after the vehicle has
been locked, the turn signal lights do not flash until they have been closed.
1)
If the “Reboot” interface is not displayed, you must manually restore the web browser display.
45
Unlocking and opening
To Next Page
Loading...
Need help?
General
