sks HT4600 User Manual

SKS-Kinkel Elektronik GmbH
Indoor station HT4600, Receiver, 2-wire
EN
Support Hotline: +49 (0) 2661 98088-112
Support E-Mail: support@sks-kinkel.de
Version No. 3.0
Document No. 97005003
24
Table of Contents
1 Installation instructions 25
2 Description 25
2.1 Contractual use 25
2.2 Features 25
2.3 Scope of Delivery 25
2.4 Storage and Transport 26
2.5 Care instructions 26
2.6 Modification 26
2.7 Safety 26
3 General information on the 2-wire BUS 26
4 Signalling 27
5 Terminal designation 27
5.1 Connection 27
6 Plans 28
6.1 Structure plan 28
6.2 Wiring plan 28
7 Montage 29
7.1 Preparation 29
7.2 Mounting on flush mounted or cavity wall box 29
7.3 Surface mounting 30
7.4 Disassembly 31
8 Initial setup 32
8.1 Setting of call address (i. e. one call button for one indoor station) 32
8.2 Programming of call addresses 32
8.3 Programming of call addresses (i. e. two to five bell buttons for an indoor station) 32
8.4 Programming of internal call addresses 33
8.4.1 Internal call addresses, the indoor station responds to 33
8.4.2 Deleting all internal call addresses the indoor station responds to from the call address storage space 34
8.4.3 Internal call addresses that are called from the indoor station 34
8.4.4 Deleting all internal call addresses from keys 36
8.4.5 Example 36
8.5 Reset to default 37
9 Operation 38
9.1 Keys 38
10 Technical Data 41
11 Service 41
11.1 Warranty 41
11.2 Service and support 41
11.3 Address 41
12 Disposal instructions 42
13 Liability disclaimer 42
14 Appendix 43

sks HT4600 Specifications

General

Brand	sks
Model	HT4600
Category	Intercom System
Language	English