What does Error Code E-5 mean on my Skutt KilnMaster Ventilation Hood?
Error Code E-5 on your Skutt Ventilation Hood means that the temperature is more than 50 degrees below the local set-point temperature during a ramp segment where the temperature is programmed to decrease.
What does Error Code E-4 mean on my Skutt Ventilation Hood?
Error Code E-4 on your Skutt Ventilation Hood means that the firing is in a ramp segment where the temperature is programmed to decrease and temperature is more than 50 degrees above the previous hold temperature.
What does Error Code E-3 mean on my Skutt KilnMaster?
Error Code E-3 on your Skutt Ventilation Hood means that during a hold segment, the temperature is more than 50 degrees below the hold temperature which was set.
What does Error Code E-2 mean on my Skutt KilnMaster?
Error Code E-2 on your Skutt Ventilation Hood means that during a hold segment, the temperature rises to greater than 50 degrees above the hold temperature which was set.
What does Error Code E-1 mean on my Skutt KilnMaster Ventilation Hood?
Error Code E-1 on your Skutt Ventilation Hood means that the temperature is increasing less than 12 degrees per hour during a ramp segment, where the temperature is programmed to increase.
What does Error Code Err P mean on my Skutt KilnMaster Ventilation Hood?
A continuous Err P on your Skutt Ventilation Hood indicates a short term power outage has occurred.
What to do if there is a power loss with my Skutt KilnMaster Ventilation Hood?
If you experience a power loss with your Skutt Ventilation Hood, recheck the selected program and reprogram if necessary.
Step-by-step guide to using Cone Fire Mode.
Step-by-step guide to using Ramp/Hold Mode.
Unpacking, parts list, electrical checks, and kiln placement.
Importance of test firing and tensioning the lid lifter.
Controller basics, modes, delay, alarm, and review functions.
Troubleshooting common firing problems and program adjustments.
Step-by-step programming for Cone Fire mode and its features.
Step-by-step programming for Ramp/Hold mode and its features.
Overview of menu structure, tips, and basic functions.
Accessing SET and DIAG options for configuration and troubleshooting.
Detailed configuration for error codes, thermocouple offset, and zone control.
Identifying and resolving error codes and common firing issues.
Procedures for brick replacement, lid maintenance, and element replacement.
Details of Skutt's product warranty and how to request service.
General| Brand | Skutt |
|---|---|
| Model | KilnMaster |
| Category | Ventilation Hood |
| Language | English |
To Next Page
