Mid Size & Full Size RT’s
Engine Powered February 2008
SKYJACK, Page 27
Visual and Daily Maintenance Inspections Section 2 - Operations
Model 71xx
Emergency Main
Power Disconnect
Switch
Battery
Electrical Panel
Motion Control Manifold
Base Control
Switches
Cushion Cylinder
Main Manifold
Brake Manifold
Emergency Lowering
Access Rod
Tilt Sensor
Manifolds•
Ensure all fittings and hoses are properly -
tightened and there is no evidence of
hydraulic leakage.
Ensure there are no loose wires or -
missing fasteners.
Electrical Panel•
Ensure panel is properly secured and -
there is no visible damage.
Ensure there are no loose wires or -
missing fasteners.
Tilt Sensor•
Ensure tilt sensor is properly -
secure and there is no visible
damage.
Hydraulic Tank (Model 9250)•
Ensure hydraulic filler cap is secure. -
Ensure tank shows no visible damage -
and no evidence of hydraulic leakage.
Hydraulic Oil (Model 9250)•
Ensure platform is fully lowered, and then -
visually inspect the sight gauge located
on the side of the hydraulic oil tank.
The hydraulic oil level should be at or -
slightly above the top mark of the sight
glass.
Emergency Lowering Access Rod •
(If Equipped)
Ensure rod is properly secured and there -
is no visible damage.
To Next Page
Loading...
Need help?
General
