Mid Size & Full Size RT’s
Engine Powered February 2008
SKYJACK, Page 29
Visual and Daily Maintenance Inspections Section 2 - Operations
2.8-7 Engine Compartment
1. Pull on the two latches to pull out engine
compartment.
Engine Control Console•
Ensure muffler and exhaust system are -
properly secured, with no evidence of
damage.
Radiator•
Ensure radiator is secure.
-
Ensure there are no loose or missing -
parts and there is no visible damage.
Check coolant level and add as -
needed.
Muffler and Exhaust•
Ensure muffler and exhaust system are -
properly secured, with no evidence of
damage.
Engine Tray•
Ensure there are no loose or missing -
parts and no visible damage to the engine
tray. Ensure that both tray-securing bolts
are in place.
Hydraulic Pump•
Ensure there are no loose or missing
-
parts and there is no visible damage.
Ensure all bolts are properly tightened. -
Ensure all fittings and hoses are properly -
tightened and there is no evidence of
hydraulic leakage.
Engine Oil Level•
Maintaining the engine components -
is essential to good performance and
service life of the aerial platform.
WARNING
Beware of hot engine components.
Check oil level on dipstick
Oil level should be in the “safe” zone. Add -
oil as needed.
Engine Air Filter•
Ensure there are no loose or missing -
parts and there is no visible damage.
Radiator
Muffler and Exhaust
Engine
Battery
Engine Air Filter
Hydraulic Pump
Engine Tray
Engine Control
Console
To Next Page
Loading...
