Section 5 Labels
Labels - Models SJ12 & SJ16
Nº
Label Pictorial Description
4
Emergency Lowering Procedure
Refer to Operating manual.
1. Turn main power disconnect switch to off position.
2. Pull emergency lowering valve to lower the platform.
5
Winching/Towing/Pushing Procedure
Refer to Operating manual.
1. Block or chock wheels to prevent aerial platform from rolling.
2. Turn main power disconnect switch to off position.
3. Locate brake valve and pump.
4. Push in black knob. Pump by pushing red knob in and out
until firm resistance is felt. Brake is now released.
5. Push/tow/winch to desired location.
6. Block or chock wheels to prevent aerial platform from rolling.
7. Reset brake by pulling out black knob.
Rear View (Continued)
5
4
Vertical Mast
Page 59
TM