Skyjack SJ20 Operation Manual

49
SJ20 236504ACA
Operator’s checklist Section 4 – Inspections Before Operation
P N/A Comment (if item does not pass inspection)
Visual and Daily Maintenance Inspections
Optional equipment and attachments - Do an inspection for leaks and
loose, damaged, or missing components. Refer to the Operation manual
for the applicable optional equipment or attachment.
Function Tests
Do a test of the main power disconnect switch
Do a test of the emergency-stop button on the base
Do a test of the off/platform/base key switch
Do a test of the lower/neutral/raise switch
Do a test of the brake release function
Do a test of the emergency-lowering function
Do a test of the emergency-stop button on the platform
Do a test of the function-enable switch
Do a test of the steer function
Do a test of the drive function
Do a test of the anti-tiedown function
Do a test of the brakes
Do a test of the platform raise and lower functions
Do a test of the horn
Do a test of the platform maintenance limit switch
Do a test of the elevated travel speed
Do a test of the SGLE switch
Do a test of the flashing light
Do a test of the dual height control console
2155AAPage 2 of 2
NOTE: Make a copy of this page or go to www.skyjack.com for a copy that you can print.
Operator’s checklist
(page 2 of 2)

Skyjack SJ20 Specifications

General

Brand	Skyjack
Model	SJ20
Category	Lifting Systems
Language	English