EasyManua.ls Logo

Skyjack SJ4740 - 10 Platform Assembly

Skyjack SJ4740
114 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
216380ACA SJ3215, SJ3219, SJ3220, SJ3226, SJ4726, SJ4732, SJ4740
40
Section 4 – Inspections Before Operation
Visual and daily maintenance inspections
4.2-10 Platform assembly
Do the inspection that follows in sequence:
WARNING
Fall hazard. Use the three points of contact
principle when you use the MEWP ladder to enter
or exit the platform. If you do not obey, there is a
risk of death or serious injury.
1. Use the MEWP ladder to enter the platform.
2. Close the gate.
1
Platform railings
Make sure there are no loose or missing parts,
and there is no visible damage.
Make sure that the lock-pins and fasteners are
correctly locked.
Make sure that the platform railings
1
are in
the correct position and locked with lock-pins.
Make sure that the gate is in good condition
and operates correctly.
2
Fall-protection anchorages
Make sure that the fall-protection anchorages
are correctly installed.
Make sure there is no visible damage.
3
AC power socket
Make sure that the socket is free of dirt or
blockages.
4
Platform control console
Make sure that the control console is locked
with lock-pins.
Make sure that the platform control cable
is correctly locked, and there is no visible
damage.
5
Manual storage box
Make sure that the operation manual and
other important documents are in the manual
storage box.
Make sure that the documents are in good
condition, and you can read them.
Always put the manuals and other documents
back in the storage box after use.
6
Power deck control console (optional
equipment) (SJ3220 and SJ4726 only)
Make sure all the switches are in the neutral
position, and are correctly attached.
Make sure there are no loose or missing parts,
and there is no visible damage.
7
Dual height control console (SJ3226 and
SJ4740 only)
Make sure all the switches are in the neutral
position, and are correctly attached.
Make sure there are no loose or missing parts,
and there is no visible damage.
3. Use the MEWP ladder to exit the platform.
2
2
1
1
4
4
3
5
5
Example model SJ3220
Example model SJ4732
6
7 7
6
2
23

Table of Contents

Related product manuals