Skyjack SJ4740 - Use the Maintenance Support(S); Deploy the Maintenance Support(S)

SJ3215, SJ3219, SJ3220, SJ3226, SJ4726, SJ4732, SJ4740 216380ACA
67
Use the Maintenance Support(s) Section 6 – Procedures
6.8 Use the Maintenance
Support(s)
Maintenance support(s)
1
are a mechanism on
the scissor assembly. When they are in the correct
position, they can hold the scissor assembly and an
empty platform.
1 1
WARNING
Use the maintenance support(s) when you do an
inspection and/or maintenance or repairs in the
confines of the lift mechanism. If you do not use
the supports, there is a risk of death or serious
injury.
WARNING
Crush hazard. Do not put parts of your body
through the scissor assembly unless the
maintenance support(s) are correctly deployed. If
you do not obey, there is a risk of death or serious
injury.
6.8-1 Deploy the maintenance support(s)
1. Remove all personnel and material from the
platform.
WARNING
Look for overhead obstructions or other possible
hazards around the MEWP when you raise the
platform. Do not lower the platform unless the area
below is clear of personnel and obstructions. If
you do not obey, there is a risk of death or serious
injury.
2. Raise the platform until there is adequate
clearance to deploy the maintenance
support(s)
1
.
3. For SJ3215, SJ3219, SJ3220, SJ3226, SJ4726,
SJ4732:
Deploy the maintenance support.
4. For SJ4740 only:
a. Deploy the lower maintenance support.
b. Deploy the top maintenance support.
5. Lower the platform until the maintenance
support(s) touch the cross members with
labels, and the platform stops.
6. Turn the main power disconnect switch to the
off position.