Skyjack SJ9250 RT - Page 88

Page 88 December 2007
Rough Terrain Scissors
Labels Section 5
No. Label Pictorial Description
1
Lanyard Anchorage Point
Attach anchorage harness lanyard here.
2
Welder Mounting Location
Welder and tray must be located within boundary of guard rails.
Tray must be mounted on midrail and one vertical post to restrict
movement.
3
Falling Hazard - Railing Pins (Horizontal) (If Equipped)
WARNING! Falling Hazard. Make sure hinged railing is pinned
properly.
4
Falling Hazard - Railing Pins (Vertical) (If Equipped)
WARNING! Falling Hazard. Make sure hinged railing is pinned
properly.
5
Connect Air Supply (If Equipped)
Connect platform air supply here.
138212AA
ZZ
6.9 BAR
100 PSI
Lanyard Anchorage Welder Tray
Railing Pins Air Line to Platform
139820AA
A
CAUTION
Welder and tray must be located within the boundry
of guard rails. Tray must be mounted on the midrail
and one vertical post to restrict movement.
1
2
3 5
4