ELECTRICAL SHOCK HAZARD
1. Plug the Skywell into a grounded 3-prong outlet only.
2. Do not remove the ground prong from the Skywell power cord. Use only the
Skywell power cord.
3. Failure to follow these instructions can cause fire or electrical shock resulting in
injury or even death.
A 120-volt, 60 Hz, AC only, 15-amp electrical supply is required. A time-delay fuse
or circuit breaker is recommended. Do not overload the circuit. If required,
provide a separate circuit to serve only the Skywell. The Skywell must be plugged
into a mating, 3-prong, grounding-type outlet; grounded in accordance with
local codes and ordinances. In the event of a malfunction or breakdown,
grounding will reduce the risk of electrical shock by providing a path of least
resistance for electric current. If a mating outlet is not available, it is the personal
responsibility and obligation of the user to have the properly grounded outlet
installed by a qualified electrician. Do not ground to a gas pipe. Do not have a
fuse in the neutral or ground circuit.
To Next Page
Loading...
