The generated water is then pumped through a solenoid valve into the top/cold
tank. The top/cold tank also has depth sensors to monitor volume. As a secondary
safeguard to prevent overflows and leaks, there is a float valve on the incoming
water line.
The top/cold tank incorporates an additional UV light and unique sensor that
further ensures water quality. A cooling coil makes the water cold and a pump
dispenses the cold water for the user. A fifth filter (UF Membrane) is configured
on the cold water dispense line for yet another safeguard to ensure water
quality.
Water is gravity-fed from the top/cold tank into an additional tank for hot water.
The hot water dispense line is configured with a sixth filter (mesh)to further ensure
water quality. The ozonator pump and generator (producing 15 seconds of
ozone every 3 hours) provide an additional cleaning element to the Skywell 5T.
To Next Page
Loading...
