POWER CONDITION Off Power state remember
LVDS BIT 8BitPanel
PWMFREQUENCY 0
PWM DUTY
OVERSCAN
OVERSCAN_RESLUTION
HPOSITION Horizontal position
VPOSITION Vertical position
HSIZE Horizontal size
VSIZE Vertical size
SYSTEM SETTING
FACHOTKEY OFF Factory hot key enable
TTX BRI 170 Logo enable
WHILE PATTERN Off NO USED
POWER REMIND 10 Preset the no signal standby time
BULE SCREEN ON Blue or Black screen when no signal
VIDEO AGC ON
DLC ON DLC enable
WHILE BLACK STRENCH Off White/black strength enable
FAC RESET DEFAULT Reset the EEPROM
OUT FACTORY RESET Reset the flash memory
AGING MODE off
If you set this item on, put the “stop”
key on the
remote control can exit aging mode .
CHANNEL PRESET Reset channel to default
To Next Page
Loading...
