Installation Settings
Note: These settings are only available in TV mode.
-16-
Color system
Selects color system.
Sound system
Selects sound system. If there is no sound or the sound
is weak, you should change the sound system accordingly.
Channel No.
Sets the received TV channel No.
Manual Search
Searches the channel manually.
Press to search upwards (higher frequency),
press MENU to stop the searching process.
Press to search downwards (lower frequency),
press MENU to stop the searching process.
Fine Tuning
Effect on the current TV signal images
are not satisfied, you can use this function to adjust.
Auto Search
Searches and saves channels automatically.
MENU
Auto Search
TV : 0 Programme(s)
15 % 184.25 MHz (TV)
INSTALLATION
Channel No.
Color System
Sound System
Auto Search
Manual Search
Fine Tuning
Channel Skip
1
PAL
BG
183.5MHz
Off
Channel Skip
" "
" " b
You can skip unnecessary program channels of your
choice not to be displayed during viewing and scanning
when pressing the buttons. Select "OFF" by
pressing uttons to select the channel that would
not like to skip from the channel scan operation.
P /
MENU CONTROL
To Next Page
Loading...
