5 Launch MultiTouchPlatform. This can be found in your application folder.
6 Press calibration button on the home screen.
7 Follow the prompts on the screen and touch the center of each “+” as it
appears.
8 Repeat steps 2-3 until an accurate calibration is achieved.
Important notes about screen calibration.
● Calibration should be done sitting in the center position of the console.
Failure to do so will result in an inaccurate calibration point.
● Calibration must be done using a direct and natural touch angle. Do not
calibrate with a bend in your wrist or from an extreme angle. Failure to
do so will result in an inaccurate calibration.
Correct Touch Angle Incorrect Touch Angle
● Do not use a stylus or other object to calibrate the screen.
● After calibration is achieved, test on desktop applications and software.
The user should be able to open and close windows with ease.
● RAVEN MTi should not be used without confirmation of proper
calibration.
INSTALLING RAVEN MTi:
Open the installer and follow the directions on the installer. Once the
applications have been placed into your applications folder and your drivers
have been downloaded, add the applictions to your dock for easy access.
To Next Page
Loading...
