Setting Up & Aligning Pro Tools With RAVEN:
Setting up Pro Tools with RAVEN is a one-time operation. On the Pro Tools
menu bar;
1) First, Navigate to your Apple on the OS Finder > Go To Dock > Turn Hiding
On.
2) Navigate To The Pro Tools Heading > Preferences
3) Then, click the “Mixing” tab
4) Check the box next to: “Always Fill Channel Strips when Banking”
5) Next, under "View" on the Pro Tools OS Menu Bar, Navigate To "Mix Window
Views"
6) Select 1 Set of Inserts and 1 Set of Sends.
7) Confirm you have your group and track lists displayed on the left of the Pro
Tools Mixer as well as confirm your clip lists are completely hidden on the right
of the Pro Tools Mixer.
8) Launch the RAVEN MTi Software from the dock.
9) Notice the light grey vertical Line on the left side of the RAVEN Toolbar.
To Next Page
Loading...
