SMA Data Manager L - Page 24

5 Mounting
SMA Solar Technology AG
Operating manualEDMM-10-BE-en-2024
Mounting the Product on the Wall
1. Press the four brackets on the back side of the
Product out from the inside.
☑ The brackets snap into place.
2. Mark the drill holes using the brackets as a template.
3. Drill the holes and insert the provided screw anchors. Do not drill through the brackets.
4. Insert the provided screws through the brackets and
tighten. Do not damage the brackets.
enne
xOS
DA
T
A MANA
GER
5. Ensure that the product is securely in place.